Portfolio / Greases and lubricants
Greases and lubricants.
Greases, assembly pastes and dry-film lubricants for maintenance.
Greases
Mobilgrease 28 — 16 kg pail
PAO-based synthetic aviation grease with a clay thickener, providing anti-wear protection over a wide temperature range. Suitable for landing gear, control systems, actuators and helicopter rotor bearings.
Quote this product View technical sheetMobilgrease 28 — 40 cartridges × 380 g
The same Mobilgrease 28 in a 380 g cartridge, for application with a grease gun.
Quote this product View technical sheetMolykote 33 Medium
Medium-consistency lithium-soap silicone grease for light loads with metal-to-metal or metal-to-plastic friction. Resists oxidation and water; compatible with many plastics.
Quote this product View technical sheetMolykote 33L
Lithium-soap silicone grease, NLGI 1, for light loads with metal-to-metal or metal-to-plastic friction at low to high speeds. Good low-temperature characteristics; water-resistant and compatible with most plastics.
Quote this product View technical sheetMolykote 55 O-Ring
Silicone grease for lubricating rubber and metal parts in pneumatic systems of aircraft, vehicles and general industry; it slightly swells rubber O-rings, which helps sealing. Do not use with silicone rubber, polycarbonate, ABS or liquid oxygen without prior testing.
Quote this product View technical sheetMolykote 44 Medium
Lithium-soap silicone grease for a broad temperature range, particularly high-temperature bearings. Low evaporation, resists oxidation and water; compatible with most plastics. Do not use on painted surfaces.
Quote this product View technical sheetMolykote 111 Compound
Silicone compound with an inorganic thickener and no dropping point. Resists water, mineral oils and many chemicals; compatible with most plastics and elastomers. Not for use with liquid oxygen.
Quote this product View technical sheetAssembly pastes and dry-film lubricants
Molykote D-321 R
Dry anti-friction coating, as a spray or in bulk, for metal-on-metal contact under high loads at slow to medium speed, including in vacuum and at extreme temperatures. Air-curing: as a spray it leaves a film of about 5 µm, dry to the touch in 5 minutes and cured in 2 hours at 23 °C.
Quote this product View technical sheetMolykote P-40
Metal-free adhesive lubricating paste for assembly and continuous lubrication, especially under water splash or humidity. Good corrosion protection; no intentionally added PTFE or PFAS.
Quote this product View technical sheet
